Proportioning valve used for disc brakes. Adjustable proportioning valves are essentially pressure reducing valves and are often utilized in disc/drum, disc/disc and drum/drum braking systems. The valve is used to control front-to-rear brake pressure bias and will work for all types of vehicles. Install this valve between the distribution block and the rear flex hose in the front to rear rigid brake line. Always use tube wrenches to tighten fittings properly. Final settings of this valve will depend on your particular vehicle, and individual preference.
Universal design, adjustable, black finish
Maximum pressure regulation 300 psi.
Inlet port of valve: 1/8 – 27 NPT
Standard adapters: 3/8” – 24 for 3/16” line included
Product was as described. No instructions for install but easy to figure out. I put the closed end of the box up under the dash first and then worked it back into position. Mark and pre-drill a few of the holes and it'll be easier to secure in place. They answered my questions via chat very quickly and were good to work with. Will be buying from them again.
I did not get to use the point set I bought, but after installing them it indicated I needed a new distributor, which I bought from the Jeepster man. They will be setting in their box on a shelf in my garage until my children sell my estate. The new distributor wors great.