• Heavy Duty Tie Rod Tube Kit, 48", 11/16" Tube, 1946-1964 Willys Pickup Truck and Station Wagon - The JeepsterMan
  • Heavy Duty Tie Rod Tube Kit, 48", 11/16" Tube, 1946-1964 Willys Pickup Truck and Station Wagon - The JeepsterMan
1 3

Jeepsterman

Heavy Duty Tie Rod Tube Kit, 48", 7/8" OD Tube, 1946-1964 Willys Pickup Truck and Station Wagon

Heavy Duty Tie Rod Tube Kit, 48", 7/8" OD Tube, 1946-1964 Willys Pickup Truck and Station Wagon

Part #: 644748K
$126.50
$126.50 USD
Sale Sold out
Shipping calculated at checkout.

New reproduction steering tie rod tube and tie rod kit, made by JeepsterMan. This 7/8" OD diameter tube is 48" in length and goes from knuckle to knuckle. This kit includes the tie rod tube, LH tie rod, RH tie rod tub, and 2 jam nuts. Tie rods will allow you to adjust the overall length up to 3".  Has a 11/16"-18 thread pitch with left hand threads on one end and right hand threads on the other end. Made from heavy-duty steel with a natural finish. Fits:

  • 1946-1964 Willys Station Wagon
  • 1947-1964 Willys Pickup Truck

Note: Please note that if you need a custom length we can make these. Please call for details. Will not vehicles equipped with the 6-230 OHC Tornado engine. 

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question
View full details

Let customers speak for us

from 1753 reviews

Distributor Cap, 226, 1954-1961, Willys Station Wagon and Pickup Truck

Bradley Peck
Distributor Cap, 226, 1954-1961, Willys Station Wagon and Pickup Truck
Chrome Bumper

Looks good, nice quality.

Robert Fisher
Front Bumper, Chrome, 1967-1971 Willys & Jeep, Jeepster Commando and CJ-5 Tuxedo Park

Dimmer Switch, 1941-1961, Willys and Jeep

Nolan Armstrong
Dimmer Switch, 1941-1961, Willys and Jeep
Mirrors

The mirrors were exactly what I was looking for. Delivery was very quick and the parts fit perfectly

Daniel Jacoby
Chrome Clamp on Door Mirror, 5' Round, 1946-1964, Willys Station Wagon and Willys Pickup Truck
Great!

Parts I needed, Fast.

William Hollinger
Distributor Assembly, 4-134 Engine, 12 Volt Solid State, 1941-1971 Willys and Jeep
Thank you

I took a gamble on these because I needed them for my dana 300.... luckily they are the exact same dimensions. So if you need shift rail interlocks for a dana 300, these will fit.

doG
Transfer Case Interlocking Shift Lever Pin, 1941-1971, Dana 18 Transfer Case
Spring

Good service

Mark Clay
Brake Shoe Return Spring, 1972-1978, Jeep Commando, CJ-5, CJ-6 and CJ7
Great looking decal

They will look great on jeeps , shipping. was fast and item was as described I thought I left feed back , but I don't mind leaving it again and yes if I need something in future and you have it you" all hear from me....

Robert Kras
Decal, Transmission & Transfer Case Shifting Pattern, 1941-1971, Willys and Jeep

Fuel Tank, Poly, Driver Side, 1945-1964 Willys and Jeep, CJ-2A, CJ-3A, early CJ-3B

Charles Thompson
Fuel Tank, Poly, Driver Side, 1945-1964 Willys and Jeep, CJ-2A, CJ-3A, early CJ-3B
Brake lines are fantastic

This is a much easier task with preformed lines. Fit great!

Travis Williams
Jeepster Commando Brake Line Set, Manual Brakes, 1967-1971

Muffler Assembly, 1946-1971, CJ-2A, CJ-3A, CJ-3B, CJ-5, Jeepster Commando

Ted DellaCamera
Muffler Assembly, 1946-1971, CJ-2A, CJ-3A, CJ-3B, CJ-5, Jeepster Commando
Good product, different application

Quality of part is solid. Delivery was faster than expected. I used this part on a Jeepster with an automatic transmission. The parts were listed for a Jeepster with a manual, but photos and lengths matched my vehicle. Hard to know what parts and mods have been made to a 53 year old vehicle .

Chris Semler
Rear Emergency Brake Cable, Manual Transmission, 1967-1971, Jeepster Commando, 134"

Valve Grind Gasket Set, 1941-1953, Willys and Jeep w/ 4-134 L-Head

Norman Wright
Valve Grind Gasket Set, 1941-1953, Willys and Jeep w/ 4-134 L-Head
Great

Great service

Wayne Dowdle
W-O Carter, Rebuild Service, 4-134, L Head, 1941-1953, MB, GPW, CJ
Good fit

This fit my 68 Jeepster Dana 30 rear axle perfectly. Make sure to take pictures before you disassemble so it goes together correctly.

Andrew Fritsche
Rear Axle Outer Wheel Bearing Cup, 1941-1971 Jeep & Willys with Dana 41/44 Rear and Model 30 Rear

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Craig Thomas
Tie rod tube

Great fit, would recommend the product