• Electric Fuel Pump, 4 - 7 PSI, Universal, 1941 - 1976, Willys and Jeep Vehicles - The JeepsterMan
  • Electric Fuel Pump, 4 - 7 PSI, Universal, 1941 - 1976, Willys and Jeep Vehicles - The JeepsterMan
1 3

Jeepsterman

Electric Fuel Pump, 4-7 PSI, Universal, 1941-1976, Willys and Jeep Vehicles

Electric Fuel Pump, 4-7 PSI, Universal, 1941-1976, Willys and Jeep Vehicles

Part #: 912000E
$71.50
$71.50 USD
Sale Sold out
Shipping calculated at checkout.

Having problems with your mechanical fuel pump? Check out this economical solid state universal fuel pump for stock engines. Set for 4-7 psi and flows up to 35 gph. 12 volt. 1/8" NPT inlet.

This pump is NOT self priming; it must be mounted below the gas tank to prevent the pump from running dry and over heating.  Failure to do so will cause premature failure of the pump. When a lower fuel pressure is required when using this fuel pump, please consider our part number: FPR

  • All carbureted engines in the Willys and Jeep vehicles that require between 4-7 PSI.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question
View full details

Let customers speak for us

from 1735 reviews
1971 cj5 spring hanger

Quality reproduction hangers better than original.

Doug Hanna
Front Leaf Spring Shackle Hanger, 1 3/4' Spring, 1946-1975, Willys and Jeep Vehicles

Work good

Kevin Daws
Sun Visor Pins, Ivory, 1967-1973, Jeepster Commando and Commando
not complete

would be complete package if included trans tunnel also could use firewall to complete restoration

jerry williams
Rear Cargo Area Floor Pan, 1967-1973 Jeepster Commando and Commando
Bed steps

The pieces are well made and fit well. That said, I was a bit disappointed that the metal wasn't straighter. I'm doing a show truck and had to do some work to make them look well. I'm Very happy to have found the scarce parts, thank you.

Chris Bleak
Bed Step Set, Driver and Passenger, 1946-1964, Willys Pick Up Truck

Wiring Harness, 12 Circuit Universal, 12 Volt, 1941-1973, Willys and Jeep

jim scola
Wiring Harness, 12 Circuit Universal, 12 Volt, 1941-1973, Willys and Jeep
Serial and Patton number plate

I did not Serial number plate on my Jeep, stamp my Vin number on it installed. It looks really good. Very happy.

Brian Stockton
VIN Registration Data Plate, 1941-1971, Willys and Jeep

Wheel Cylinder, Front Right, 1946-1964, Willys Jeepster, Station Wagon, Pickup, FC

Douglas Reicher
Wheel Cylinder, Front Right, 1946-1964, Willys Jeepster, Station Wagon, Pickup, FC

Very satisfied... good service

Donnie Sullivan
Air Cleaner Hose, 1953-1971, CJ3B, CJ5, and CJ6 with 4-134 Engine
AMC V8 EMBLEM

VERY NICE PART LOOKS LIKE ORIGNAL

SHANE GLAESEMANN
"V8" Emblem for the 304, 1972-1973, Jeep Commando C104
The fit!

both hoses fit well and is what you need when they get old and rotted off.

travis bruns
Filler & Vent Hose, 1978-1986, Jeep CJ-5 & CJ-7 w/ 15 Gallon Tank
A little extra length helps a LOT!

Trying to re-hang the rear leaf spring with an add-a-leaf helper on my 67 commando wouldn't have been possible without the extra length on these u-bolts.

jack bell
U Bolt, Rear, 7/16" Thread, 1945-1971, Willys Jeep CJ2A, CJ3A, CJ3B, Station Wagon, Jeepster Commando
Product purchase rating

Everything installed easily, now it’s time to road test the parts.

Thomas Crozier
Spindle Nut Kit, Dana 25, 27, 30, 1941-1986 Willys and Jeep
Replacement arm rests.

I wish red was an option. Black will do for now. Let me know if red are available.

Dennis Bennion
Arm Rest, 1967-1971, Jeepster Commando

came ith all the needed parts for the conversion

Paul Hefner
Carburetor, Weber Conversion Kit for the 225 Dauntless V6, 1966-1971, Jeepster Commando, CJ-5, and CJ-6
WINDSHIELD SEAL

GREAT PRODUCT - GREAT SERVICE

Scott Tree
Windshield Rubber Seal, 1967-1973, Jeepster Commando and Commando

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)