Hey guys this is John and today we're going to talk about this uh junction uh block, this three post block that we're installing on this Jeepster commando. But this post fits just about any Willys and Jeep vehicle out there- CJs uh the Willys station wagon, Willys pickup truck, CJ2A's, 3A's, CJ3B & CJ5, Jeepster Commandos and they all pretty much mount the same way they mount on the inner fender typically on the driver's side. You can see I've got a whole mess of wires here for my headlights and that's what this this junction post is for. This is the three post. We also sell a six post. And all you need to do is just grab some spare hardware I had, I'm using quarter inch to hold this in place and you should already have holes in your inner fender form em, should mount right in place. I'm not going to talk about how to hook these wires up because it'll differ between vehicles so you really need to refer to a wiring harness diagram to make sure you hook those up correctly. But I am going to install this on the inner fender. The part number for this is 638977 you can find this on our website thejeepsterman.com If you've got questions you can email Us sales@thejeepsterman.com Or you can call 314-798-6462 And we want to thank you for watching.
![3-Post Junction Install - The JeepsterMan](http://thejeepsterman.com/cdn/shop/articles/3-post-junction-install-356479.jpg?v=1721817353&width=1100)